Lanner Digital Input/Output User Manual
Page 10
Software User Manual
Version 1.0
8
1.
Make the program (refer to the website’s manual installation guide).
2.
Run sensors –detect to let the system detect the hardware monitor chips automatically and
install the module.
3.
Copy the modified configuration file for better or more readable output: sensors3.conf
(provided by Lanner in the HW folder on the Driver and Manual CD) under the /etc/sensors.d/
4.
Run sensors –s (The –s option evaluate all `set' statements in the sensors3.conf configuration
file and exit)
5.
Run sensors to output the hardware monitor information