Lanner Digital Input/Output - Manual (Page 24)

Software User Manual Version 1.0
22
LED:
Specific to Lanner products, there are several front panel LEDs which can be
programmed to signal certain functions in the system such as the RUN (for system
operating status), Alarm, GPS, Wireless etc.
Winbond W83627UHG superI/O:
The index address is 2EH.
Fintek F81865 SuperI/O Chip:
The index address is 2EH.
Ex: Winbond W83627UHG SuperI/O Chip
W83627UHG_test RunLED port_number
value (value: 0,1,2,3..........)
Ex: Fintek F81865 SuperI/O Chip
F81865 RunLED port_number value
(value: 0,1,2,3........)
Note: Refer to Appendix A for more
information on Register (page 150 of
W83627 datasheet) Note: Refer to Appendix B for more
information on Register (page
87-101 of F81865 datasheet)
Monitor:
The Monitor field shows the following information (from left to right):
CPUTIN: shows the CPU temperature
5Vcc: shows SuperIO’s 5V voltage
5Vsb: shows SuperIO’s standby voltage
AVcc: shows SuperIO’s IO voltage
CPUVCore: shows CPU voltage
VBat: shows battery volrage
VIN0~VIN2: shows other voltages
The corresponding commands: