Lanner FW-8892 - Manual (Page 26)

FW-8892
26
3. Hardware Installation Guide
3.1 System Memory
Position the DIMM module to the DIMM socket properly, so the notch on the
memory module first the socket. Push the memory into the socket.
Note: The memory module requires the proper orientation in order to fit into
the socket properly.
3.2 Install the Compact Flash Card
Carefully insert the Compact Flash card into the slot as shown in the
illustration above.
3.3 Din-Rail Rack Mounting
Installation environment precaution:
1. Elevated Operating Ambient - If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may
be greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.
2. Reduced Air Flow - Installation of the equipment in a rack should be such
that the amount of air flow required for safe operation of the equipment is
not compromised. Mechanical Loading - Mounting of the equipment in the