Lanner FW-8877 - Manual (Page 31)

25
BIOS Settings
Chapter 4
Network Application Platforms
SuperIO Configuration
In this screen, you will be able to modify the IRQ address
of the serial and parallel ports.
Serial Port 0/1 Configuration
This option specifies the base I/O port address and
Interrupt Request address of serial port 0 and 1.
item Selection
Enabled/
Disabled Set this value to prevent the serial port from
accessing any system resources. When this
option is set to Disabled, the serial port physically
becomes unavailable.
Change
Settings Selects the serial port base address and IRQ for
the interrupt address.