Lanner FW-8877 - Manual (Page 18)

12
Motherboard Information
Chapter 3
Network Application Platforms
Jumper Settings
LCM_S1: USB-type front LCD Message Display Module
(LCM). It supports both text and graphic type of LCM. The
board also facilitates Parallel -type LCM connector, refer to
jumper LCM_P1.
LCM_P1: Parallel type front LCM connector. It
supports both text and graphic type of LCM. The board
also facilitates USB -type LCM connector, refer to jumper
LCM_S1.
MGT1: RJ 45 management port connector NO.1
Pin No. Function Pin No. Function
1 P5V_SB 2 P5V
3 USB_PCH_P5N 4
5 USB_PCH_P5P 6 HDD_LED_N
7 GND 8 GND
9 NTXD2 10 NRXD2
Pin No. Function Pin No. Function
1 MGT1_MDIP_0 2 MGT1_MDIN_0
3 MGT1_MDIP_1 4 MGT1_MDIN_1
5 MGT1_MDIP_2 6 MGT1_MDIN_2
7 MGT1_MDIP_3 8 MGT1_MDIN_3
9 MGT_LAN1_100# 10 MGT_LAN1_ACT#
11 MGT_LAN1_1G# 12 P3V3_AUX
MGT2: RJ 45 management port connector NO.2
(optional)
LOM1: RJ 45 management port connector with IPMI
function
Note: To have the management port on the
front panel compliant with IPMI, use this pin
header instead of MGT1 or MGT2.
SATA1: SATA Revision III Drive Connector
SATA2~SATA4: SATA Revision II Drive Connector
It is for connecting a 3.5’’ SATA harddisk to be served
as your system’s storage. The system can support up to
one 3.5" or two 2 5" disks in maximum. The system’s
BIOS supports 3 modes of SATA configuration, i.e., IDE,
RAID, and AHCI. The chipset provides hardware support
for Advanced Host Controller Interface (AHCI) which
is a programming interface for SATA host controllers.
AHCI provides advanced performance and usability
enhancements with SATA such as Hot-Plug, no master/
savle designation for SATA devices and native command
queuing (NCQ).
Pin No. Function Pin No. Function
1 MGT2_MDIP_0 2 MGT_MDIN_0
3 MGT2_MDIP_1 4 MGT_MDIN_1
5 MGT2_MDIP_2 6 MGT_MDIN_2
7 MGT2_MDIP_3 8 MGT_MDIN_3
9 MGT_LAN_100# 10 MGT_LAN_ACT#
11 MGT_LAN_1G# 12 P3V3_AUX
2 10
1 9
PIN DESCRIPTION PIN DESCRIPTION
1 VCC 2 IOGND
3 LSTIN- 4 VEE
5 LAFD- 6 LINIT-
7 LPD1 8 LPD0
9 LPD3 10 LPD2
11 LPD5 12 LPD4
13 LPD7 14 LPD6
15 LCD 16 VCC
17 K1 18 K2
19 K3 20 K4
21 RESET 22 VCC3
23 GPIO 24 VCC3
1
23
1
2
24
2 12
1 11
2 12
1 11
2
4
12
1
3
11
Pin No. Function Pin No. Function
1 MGT0_MDIP_0 2 MGT0_MDIN_0
3 MGT0_MDIP_1 4 MGT0_MDIN_1
5 MGT0_MDIP_2 6 MGT0_MDIN_2
7 MGT0_MDIP_3 8 MGT0_MDIN_3
9 IPMI_
SPEED_100_L_N
10 IPMI_ACT_L_N
11 IPMI_
SPEED_1G_L_N
12 IPMI_P3V3_AUX_L