Jordan Valve Mark DBAQ Series Angle Style Control Valve - Manual (Page 7)

-7-
P
arts
o
rderIng
The Mark DBAQ Series Valves are identified by a serial number located on the valve body. Please reference this
number when contacting a Jordan Valve Representative for technical support or part inquiries.
When shipped as part of a complete valve assembly with a Controls actuator, the same valve serial number can be
found on the actuator nametag as well as the valve body.
Figure 3: 2” Mark DBAQ Series
Item Description Item Description
1 Body, LCC, 900/1500#, RF 13 Packing Set, Upper Packing, PTFE
2 Bonnet, LCC, 3-9/16 Yoke Boss 14 Packing Set, Center Packing, PTFE
3 Bonnet Flange, LCC 15 Packing Set, Lower Packing, PTFE
4 Pin, Ø.187, 316 SST 16 Packing Flange, Steel
5 Bonnet Gasket 17 Packing Flange Stud, Steel
6 Seat Ring Gasket 18 Packing Flange Nut, Steel
7 3/4" Stem, 316 SST 19 Packing Box Ring, 316 SST
8 Hex Nut, 9/16”, ASME SA-194-2H 20 Upper Wiper, Felt
9 Stud Bolt, 9/16”x3.78, ASME SA-193-B7 21 Packing Follower, 316 SST
10 Cage 22 Packing Spring
11 Seat Ring 23 Special Washer
12 Plug 24 Lower Wiper, Felt
M
ark
DBaQ S
erieS
a
ngle
S
tyle
C
ontrol
V
alVeS