Ion Science Tiger - Manual (Page 23)

TIGER MANUAL Ion Science Ltd
Page 23 of 46 Unrivalled Detection. www.ionscience.com
Tiger PC software
The Configuration Screen
Use this screen to configure your TIGER.
Backlight
Choose from ‘Permanently Off’, ‘Permanently On’, ‘On in low ambient Light’, or ‘On For Limited Time’. The
Backlight Timeout can be set from 1 to 99 seconds.
Sound
The three icons represent: key press; alarm; and crescendo. Crescendo increases the sound as the upper
alarm is approached. Sound on each of these may be enabled or disabled by ticking or un-ticking the box.
Sound volume is adjusted with the slider.
Units
The units of measurement may be chosen as parts per million (ppm) or milligrams per cubic meter cubed
(mg/m
3
). If you have the high the high sensitivity option / upgrade then Parts Per Billion (ppb) and
Micrograms per meter cubed (µg/m 3 ) are also available.
Lock
The TIGER may be locked in any configuration to avoid unauthorised changes by the operator. A tick in the
box locks the instrument. Soft keys in Button A column are enabled and Buttons in column B disabled.
Sleep during PC connect will send the instrument into sleep mode while it is connected to the PC software.
The instrument will awaken as soon as it is disconnected from the PC software.
Soft Menu
The various functions may be allocated to the soft buttons in any order of preference by dragging and
dropping the icons.