Invotel SX9258 - Manual (Page 4)

iv
Recording:
Connect the included headset to SX9258 as shown:
Connecting the external audio source:
You may connect the headset but do not connect
the microphone. Connect the Audio IN to your
audio source speaker or headphone jack using
the provided 3.5mm to 3.5 mm audio cord.
1. Press REC to stop the playback, GREEN LED turns OFF.
2. Start your music/audio and press REC now to start
recording, RED light turns ON to indicate recording in progress.
3. Press REC to stop at the end of your music. RED light turns OFF and
Green will turn ON.
The device automatically starts it’s normal playback, and will play what you
just recorded repeatedly.
If you need to re-record repeat the above steps
BANK2 Recording:
SX9200, SX9258, SX9300 and SX9400 models have dual banks and a
Bank1/Bank2 switch for immediate playback of bank2 by just flipping the
bank switch, the total default recording time on the MX9000 is 8 minutes
40 seconds so if your Bank1 recording is 3 minutes long then Bank2 can be
used for a second production of up to 5 minutes 40 seconds duration.
Flexible duration Bank2 addressing is not fixed, you can record any
duration in BANK1 and any duration in BANK2 as long as the total is 8
minutes 40 seconds or less.
Examples of recording for Bank2 are “Holidays”, special events, sale
promotions, etc. The SX9258 automatically calculates the Bank2 start
point when you finish recording BANK 1.
MX9000 cards recorded in BANK1 and BANK 2 can be played in the SX9200
or SX9400 models
To record into Bank2:
set switch to BANK2
and do the same 3 steps
as recording in BANK 1
The device automatically starts it’s normal playback, and will play what you
just recorded and will keep repeating. If you need to re-record just repeat the
3 steps. You may flip the switch to Bank1 or bank 2 any time and device will
play back that bank repeatedly.
Please note: since Bank2 addressing is flexible:
If you re-record the Bank1, then you need to re-record the Bank2
.
AUDIO IN
Audio source
PC
CD player
MIC
IN
8Ω or 1200Ω RCA
BANK
1 2
RED 3.5mm plug is not used
on this model
REC
IN
BANK
1 2
You need to record BANK1 1 st Before you can record BANK2
after you finish recording bank1, the SX9258 automatically calculates the
bank2 starting point
P4
P5