Warranty, Other settings, Special case – Invotel SX8200 User Manual
Page 3: Operation in hold activation

iii
Other settings:
for GE 2-9487GE2-A , GE 2-9488GE2-A and RCA 25403
phones use the
B3 setting and follow the instructions on page 3 it should work by just
pressing the HOLD button, if still it did not work use the B1 or B2 settings Via
Flash then Hold-see page 4 for full details, these two models of GE phones
beep every 3 seconds and do not work in C1 or C2 settings.
Special Case:
If audio activates suddenly in A1 or A2 switch settings ,
your lines may be “too powerful” Try A3 setting.
Warranty
This product is warranted against defects for a period of five (5) year from the date of original
invoice. We will repair/replace the Product with no charge for parts or labor within this time. To
obtain warranty service the Product needs to be returned fright prepaid by the customer with a
copy of original invoice. This warranty does not apply if in the sole opinion of Innovative
Telecommunication Technology LLC, the product has been tampered with or damaged by
lightning or any other acts of nature, misuse, neglect or unauthorized service.
EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT, THERE ARE NO OTHER
WARRANTIES, EXPRESSED OR OTHERWISE,INCLUDING, BUT NOT LIMITED TO ANY
IMPLIED WARRANTIES OR MERCHANTIBILITES OR FITNESS FOR A SPECIAL PURPOSE.
IN NO EVENT SHALL INNOVATIVE TELECOMMUNICATION TECHNOLOGY LLC BE LIABLE
FOR LOSS OF PROFITS OR BENEFITS, INDIRECT, SPECIAL, CONSEQUENTIAL OR
OTHERWISE ARRISING FROM ANY BREACH OF THIS WARRANTY OR OTHERWISE.
Operation in Hold activation:
Start with A1, make or receive a real call, the LED on the SX8200 turns ON solid,
then simply press the button on your telephone, the Music will be heard to
the caller and the LED on the SX8200 will start to BLINK , to return to the call just
re-select that line. (Be sure to allow 1 or 2 seconds before putting a call on HOLD).
If it did not work hang up and try it again 2 or 3 times.
A2: if after 2 -3 times it is not working hang up and change the switch to A2 and try
it 2-3 times. A3: this setting works better on smaller offices with just a few phones, it
is not as powerful as A1 or A2, if your phones work fine in A3 just leave it in A3.
Deactivating hold music manually If for any reason the hold music is activated
inadvertently, it can be deactivated by pressing the button
The following are examples of phones that work in B1, B2 or C1,C2,C3 settings: American
Venture, ATT 962, ATT 972, Casio any model , Airway 2 line, Airway 4 line, Panasonic KX-TG
2000B, KX-TG4000B
,
KXTG2000, KX-TG2720, KX-TG2730, KX-TG2740, KXTG4000, KX-
TGA200, KXTGA400, KX-TGA420
List of corded phones compatible via Hold Button activation:
AT&T: 21070, 262, 272, 412, 422, 4952, 612, 622, 712, 722, 732, 742, 752, 812, 822, 830,
832, 842, 843, 853, 854, 874, 902, 912,922, 944, 945, 952, 953, 954, 955, 964, 974*,984*,
982, 992, SIGNATURE, FT483 (* revision prior to 11/2006)
Brother Quatro: 412
Bell: 223, 232, 259, 261, 268, 367, 470, 52905, Sonecor 412, 412CID, 4900, BE5200,
BE5300, Techline 420
GE: 187, 2-9315-A, 2-9318, 2-9435-A -B -C, 2-9436-A, 2-9438-A, 2-9450-A -B -C -D -E -
F, 2-9439-A to -EGL, 2-9451A, 2-9481, 2-9487GE2-A, 2-9488, 2-9638-A, 2-9975, 2-
9488GE2-A
IBM: 412, 412CID, 4900 , Northern Telecom: Unity , Phonemate: PMG-4600
Panasonic: KX-T3110 3120 3122 3135 3145 3155 3160 3165 3170 3175 3280 3980-H
3980-R7 3981, KX-TC930, KX-TS20, KX-TS21, KX-TS25, KX-TS27, KX-TS208, VA-8400
Radio Shack: 206, 208, 209, 210, 212, 411, 412, 612, 43-373D, 43-430, 43-642, ET-180,
43-470, ET-184, ET-192, ET-193, 43-622, 43-469 , 1710, 1753
RCA 25403 RCA, 25413 RCA-2, etc. all models
Sony: IT-M804 , SBC: 2105, 4000, 225, 410, 420
Southwestern Bell: FT325, FT360, FT365BL FT383, FT412, FT483, FT484
Sprint/Radio Shack: SP-702 / 43-5702, SP-705
TT Systems: 4012, 412, 412CID, 4900, 4300, 5100, 5200, 5300, 7993
Vtech: 4121
Please note: This is a partial list, there are other factors that effect Hold button activation.-see-
the trouble shooting section or special setting, If your phone is not on this list try it or use the
B1, B2 , C1, C2,or C3 settings. B1, B2 works on all phones.
SBC 225 (2 line) and SBC 420 (4 line) Telephones (available at http://www.invotel.com) are
guaranteed to work via just Hold button in A3 setting
A B C 1 2 3
Hang up and set left switch to A position
FLASH
HOLD
Tip: If you have audio flicker problem , Reduce the Volume on your audio source
P3
P6
A B C 1 2 3