beautypg.com

Quick start – Yaskawa SmartTrac CPU Card User Manual

Page 8

background image



SMART TRAC CPU Card

4

••

Smart Trac CPU Card Technical Manual

Quick Start

1. Power OFF your Smart Trac AC1.

2. Remove all cards in the Smart Trac card stack except for the Inverter

card (bottom most card of the stack). The Smart Trac CPU card is last
to be removed.

3. Install the replacement Smart Trac CPU Card in your Smart Trac AC1

in the position just above the inverter card.

4. Replace all other cards in their proper position in the card stack.

5. Power up your Smart Trac AC1.

6. Set the Smart Trac system clock and any other boot menu parameters

your application may require.

7. Test your Smart Trac system.

See also other documents in the category Yaskawa Equipment: