Yaskawa Ladder Works Operation Manual - Manual (Page 136)

5.5 OPERATION IN LADDER EDITOR
5-22
Click the Refresh button, then Register Map is refreshed.
5.
Click the Display Mode button, then display mode is changed.
(1) BWLFA button
The presence of the symbol for the register is displayed all data type such as bit
type(B), integer type(W), double integer type(L), real type(F), and address
type(A)simultaneously. The data type in which the symbol is defined is displayed in
each cell by combining alphabets
(2) Other buttons
The presence of the symbol for the register is displayed each data type. The “*” mark
is displayed when the symbol is defined.