Yaskawa MECHATROLINK-III - Manual (Page 19)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 62B 1000-Series Option SI-ET3 Installation Manual 19
2.
With the front covers and digital operator removed, apply the LED label (E) in the
appropriate position on the drive top front cover (C).
Figure 4
Figure 4 Apply the LED Label
3.
Insert the option (B) into the CN5-A connector (M) located on the drive and fasten it
using one of the included screws (H).
Figure 5
Figure 5 Insert the Option
R/E LK1
CON LK2
C
E
A1000
NS MS
M
H
B
A1000