7 maintenance and cleaning, 1 maintenance, 2 cleaning – SMA BEAM REPEATER User Manual
Page 20: 8 decommissioning, 1 disassembly, 2 packaging for shipment, 3 disposal, Maintenance and cleaning, Maintenance, Cleaning
Maintenance and Cleaning
SMA Solar Technology AG
20
SBeamRep-BEN091911
User Manual
7 Maintenance and Cleaning
7.1 Maintenance
The repeater does not require maintenance.
7.2 Cleaning
8 Decommissioning
8.1 Disassembly
Pull the USB plug-in power supply's plug out of the socket. Then pull the USB plug out of the repeater.
8.2 Packaging for Shipment
When returning the device to us, be sure to use packaging which adequately protects the device from
damage during transport (if possible, the original packaging).
8.3 Disposal
Dispose of the repeater at an authorized disposal company.
ATTENTION!
Damage to the device due to penetration of liquids.
The repeater is not waterproof, liquids should not be allowed to penetrate.
• To clean the device, use only a lightly dampened cloth so as to prevent the
penetration of liquids. If there is a considerable amount of dirt, you can also use a
mild, non-abrasive and non-corrosive cleaning agent.