SMA DU-SC-US - Manual (Page 21)

SMA America, LLC Transporting the Disconnect Unit Without Packaging
Unpacking DISU_SCUS-AP-eng-IUS110911 21
7 Transporting the Disconnect Unit Without Packaging
7.1 Transporting the Disconnect Unit Using a Crane
11. Position the crane hook with crane cables in the
center above the Disconnect Unit.
12. Connect the load hook of the crane cables to all four
crane eyes of the Disconnect Unit.
13. Raise the crane hook slowly until the crane cables are
tensed.
14. Ensure that all crane cables and load hooks are attached correctly.
15. Raise the Disconnect Unit slightly.
16. Transport the Disconnect Unit to the installation site.
8"3/*/(
Danger of crushing if raised or hovering Disconnect Unit tips over, falls or swings!
If the Disconnect Unit is raised and transported without due care or too quickly it may tip over or fall.
• Transport the Disconnect Unit as close to the ground as possible at all times.
• Use all suspension points for transportation.
• Avoid making fast and jerky movements with the crane.
• Keep a safe distance from the Disconnect Unit at all times during transport.
• All means of transport used must be designed for the weight of the Disconnect Unit of
1 510 lbs. (685 kg).