SMA DU-SC-US - Manual (Page 17)

SMA America, LLC Unpacking the Disconnect Unit
Unpacking DISU_SCUS-AP-eng-IUS110911 17
6.2 Removing the Lashing Straps
The Disconnect Unit box is secured to the pallet using lashing straps to prevent tipping during
transport.
1. Cut through lashing straps with a knife.
2. Remove the lashing straps.
$"65*0/
Risk of being cut by rebounding lashing straps!
The lashing straps are under tension and spring back when removed.
• Wear personal protective equipment.
• Keep a safe distance from the lashing straps.
8"3/*/(
Danger of crushing caused by tipping package!
If insufficiently secured, the package can fall off the pallet.
• Take note of the centre of gravity marking on the transport packaging.
• All means of transport used must be designed for the weight of the package of 1 510 lbs.
(685 kg).
• Do not tip package over during transport.
• Do not transport the package unless sufficiently secured.
• Keep a safe distance from the package at all times during transport.