SMA Anemometer - Manual (Page 9)

SMA Solar Technology AG Mounting the Device
Installation Guide Windsensor-IEN101010 9
4.2.2 Wall Mounting with Wall Mounting Bracket
The optional wall mounting bracket is required for wall mounting using the wall mounting bracket.
1. Determine the mounting position taking into
consideration the requirements of the mounting
location.
2. Attach the wall mounting bracket to the wall using
screws, screw anchors and washers.
3. Mounting the anemometer on a mast (see page 8).
4. Attach cables closely to the wall mounting bracket
using cable ties or similar attaching material.
☑ The anemometer is mounted.
SMA order number: Wall mounting bracket
Position Number Description
A
1 Wall mounting bracket
B 4 Hex screws
C 4 Washers
D 4 Screw anchor