SMA Anemometer - Manual (Page 6)

Unpacking SMA Solar Technology AG
6 Windsensor-IEN101010 Installation Guide
3 Unpacking
3.1 Packing List
3.2 Cabling Recommendations
In the event that the pre-configured output cable is too short, please note the following information
when purchasing a longer cable:
• Cross section: min. 2 x 0.25 mm², min. 2 x AWG 24
Tip: you can also use a 4-core line (4 x 0.25 mm²).
• External cable diameter: min. 4.5 mm, max. 6 mm
• The maximum cable length may not exceed 30 m
• UV resistant (for outdoor use only)
Position Number Description
A
1 Anemometer with 3 m output cable
B 1 Mounting angle
C 2 Screws
D 2 Screw anchor
E 2 Straps
F 2 Washers