SMA Anemometer - Manual (Page 12)

Decommissioning SMA Solar Technology AG
12 Windsensor-IEN101010 Installation Guide
6 Decommissioning
6.1 Disassembling the Sensor
1. Reset the configuration of the sensor in the communication device.
2. Detach the sensor cable from the communication device.
3. Disassemble the sensor depending on the assembly type.
☑ The sensor is now disassembled.
6.2 Disposing of the Sensor
At the end of its service life, dispose of the sensor in accordance with the applicable disposal
regulations for electronic waste at the installation site at that time. Alternatively, send it back to
SMA Solar Technology with shipping paid by the sender, and labeled "ZUR ENTSORGUNG"
("for disposal").