SMA WEBBOX-BT-20 Installation - Manual (Page 21)

SMA Solar Technology AG Assembly
Installation Manual SWebBox20-IA-en-12 21
5.3 Mounting the Sunny WebBox on the Wall
1. Take the relevant requirements into account when defining the mounting location.
2. Use the drilling template to determine the position of the Sunny WebBox and to mark the drilling
holes with a pen.
3. Drill holes with 6 mm diameter at the marked points and insert wall plugs.
4. Screw in the screws and leave approx 6 mm protruding from the wall.
5. Hang the Sunny WebBox from the screws.
Noting the serial number
Before mounting the Sunny WebBox, make a note of the serial number given on the type
label. You will require the serial number later to call up the Sunny WebBox user interface.