SMA SMC 9000TL Installation - Manual (Page 30)

30 SMC9-11TLRP-IA-en-51 Installation Manual
5 Mounting SMA Solar Technology AG
10. Ensure that the inverter is securely attached.
7. Attach the inverter to the wall mounting bracket
on both sides using the M6x8 screws provided
and an Allen key (AF 5). Only tighten the screws
hand-tight. That prevents the inverter being lifted
out.
8. Close the recessed grips with the ventilation
grids. Ensure the assignment is correct. The
correct assignment is marked on the inside of
each ventilation grid: links/left for the left-hand
side and rechts/right for the right-hand side.
9. If the holes for attaching the safety screw are
pre-drilled, secure the inverter with at least one
safety screw through the pre-drilled hole.