4 display, 1 operating the display, 2 display messages during the start-up phase – SMA SMC 9000TL User Manual
Page 16: Display, Operating the display, Display messages during the start-up phase
4 Display
SMA Solar Technology AG
16
SMC9-11TLRP-BA-en-30
User Manual
4 Display
4.1 Operating the Display
You can operate the display by tapping the enclosure lid.
• To switch on the backlight, tap once.
• To switch to the next display message, tap once.
• To display the messages from the start-up phase again, tap twice.
4.2 Display Messages during the Start-Up Phase
• To view the display messages of the start-up phase again during regular operation, see
Section 4.1 "Operating the Display", page 16.
Display message
Description
Inverter device type
Firmware version of the internal processors
Configured country data set
(example: VDE-AR-N4105-MP)
Configuration of the SMA Power Balancer
(example: PowerGuard)
SMC xxx
Wrxxx
PowerBalancer
PowerGuard
This manual is related to the following products: