SMA SMC 9000TL - Manual (Page 14)

3 Product Description SMA Solar Technology AG
14 SMC9-11TLRP-BA-en-30 User Manual
3.4 Display and LEDs
The display and the LEDs of the inverter are located on the enclosure lid and indicate the operating
state of the inverter.
Figure 4: Design of the display
The display shows the current operating data of the inverter (e.g. status, power, input voltage) and
faults or disturbances.
The LEDs indicate the operating state of the inverter, and clarify the messages in the display using
different blink codes (see Section 5 "LED Signals", page 18).
Item Designation Explanation
A Display Two--line LC text display for displaying operating
data
B Tap symbol You can operate the display by tapping it (see
Section 4.1 "Operating the Display", page 16).
C Green LED Indicates the operating state of the inverter.
D Red LED Indicates an earth fault, a defective varistor or a
defective string fuse
E Yellow LED Indicates a fault or disturbance. Read the manual
to remedy the fault or disturbance