SMA FLX Series Sensor Interface Option - Manual (Page 9)

3 Troubleshooting
If a sensor is not detected:
1. Confirm that the option is correctly installed, see
section 2.1.1 Verification via Display.
2. Go to the inverter equipped with the sensor
interface option. Normally this is the master
inverter.
3. Find the event ID reported by the inverter
• In the display, go to [Log
→ Event Log].
Find the event ID under [Latest event]
or [Last 20 events]
• In the web interface, go to [Inverter
level: Log
→ Event Log].
Find the event ID under [EventId].
4. Refer to the event list in the User Guide for
explanation of error codes and recommended
action.
Troubleshooting
8 L00410607-02_2q / Rev. date: 2014-06-20
3 3