EverFocus EDR-1610A - Manual (Page 61)

EDR910_1610_ma_en_rev1 00 - 61 -
DISPLAY SETTINGS
8. DISPLAY SETTINGS
8.1. BRIGHTNESS, CONTRAST, COLOUR
Press SELECT to adjust brightness, contrast and colour for each video channel in full
screen mode of the respective camera (channel keys 1 ~ 9 resp. 1 ~ 16):
Press ENTER to switch between the settings and use the JOG to adjust the values on the
slidebars.
(1) BRIGHTNESS: Adjust the image brightness from 0 ~ 100%.
(2) CONTRAST:
Adjust the image contrast from 0 ~ 100%.
(3) COLOUR:
Adjust the colour saturation from 0 ~ 100%.
The current value is indicated both on the slidebar and as percentage. Press MENU or
SELECT to leave the menu.
8.2 IMAGE POSITION ADJUSTMENT ON MONITOR
If the monitor display is not centre positioned, the horizontal and vertical image position
can be adjusted.
Press the ZOOM key in any multiscreen display (not full screen mode).
Use the JOG to horizontally centre the image position and press ENTER to switch to
vertical direction.
Further ZOOM key actuation switches the adjustment off.