EverFocus EDR-1610A - Manual (Page 52)

EDR910_1610_ma_en_rev1 00 - 52 -
RECORDING
4. RECORDING
4.1 RECORDING
ATTENTION: The following instructions as regard to the EDR DVR recording and
recording standby have to be followed thoroughfully. Some of the DVR’s
functions significantly differ from previous models.
Actuate the REC key to switch the DVR to recording resp. recording standby mode. The
red LED within the REC key is illuminated.
Alternatively, the DVR can be switched to recording / recording standby mode through
the REC IN input contact.
ATTENTION: The DVR must be switched to recording standby mode (LED in REC key
ON!), even if only motion- or alarm-triggered recording is selected (no continuous
recording), otherwise no recording will be processed!
This doesn’t apply to scheduled recordings (TIMER) which switch to recording mode even
if recording standby mode is switched off.
Press the STOP key to stop the recording resp. recording standby.
• To stop scheduled recordings, the timer must be deactivated in the TIMER menu.
• First STOP key actuation in playback mode stops the playback, second actuation
stops the recording resp. recording standby.
4.2 TIMER – scheduled recording
Define the scheduled recording settings in the TIMER menu.
With activated timer, recording starts and stops automatically.
REC
STOP