EverFocus EDR-1610A User Manual
Page 48
EDR910_1610_ma_en_rev1
00
- 48 -
3.11.3 NO HDD
The DVR detects when both harddisks are removed, switched off or not detected. Define
the alarm reactions in this menu item:
(1) BUZZER:
By selecting “ENABLE”, the buzzer is activated.
(2) ALARM OUTPUT:
Output relay activation.
1
Output relay 1 switches upon alarm.
NONE no output relay reaction upon alarm.
(3) ALARM DURATION: Alarm duration adjustment from 1~99 seconds or permanent.
(4) NETWORK ALARM: YES:
Network alarm activated (for settings refer to
NETWORK
menu)
Network alarm reception requires optional PowerCon
software.
NO:
No network alarm transmission
(5) EMAIL:
YES:
Alarm email transmission (for settings refer to
NETWORK
menu).
NO:
No email alarm transmission.
WARNING SETUP MENU
FAN
FAULT
BUZZER
ENABLE
HDD TEMP.
ALARM OUTPUT
1
NO HDD
ALARM DURATION
PERMANENT
HDD FULL
NETWORK ALARM
NO
NO