Call monitor setup – EverFocus EDR-1610A User Manual

Page 60

EDR910_1610_ma_en_rev1

- 60 -

CALL MONITOR SETUP

7. CALL MONITOR SETUP

Enter the call and matrix monitor setup menu by pressing the CALL key:

Define the following settings in the CALL menu:

Press ENTER to select the respective monitor and the selection options:

(1) SEQ:

“ON" activates the monitor’s sequence mode (automatic sequential

switch).

(2) OSD:

“ON" activates the monitor’s status display including camera number,

monitor number and active alarms for this monitor.

(3) CAMERA: Select the camera to be displayed with the channel keys 1~9 (EDR910)

resp. 1~16 (EDR1610).

CALL MENU

MONITOR SEQ

OSD

CAMERA

CALL MON

OFF

PRESS SEQ/MIDDLE TO ON/OFF SEQ
PRESS DISPLAY TO ON/OFF OSD
PRESS CHANNEL NO/WHEEL TO SET CAMERA