ShoreLand'r PS4X6 - Manual (Page 8)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003620
Page 8 REV D 04/15/2008
When securing the taillight and bracket
to the rear crossmember, secure the
grounding wires before tightening.
Secure the wire tube to the rear
crossmember using a conduit clamp,
1/4” x 3/4” hex bolt and 1/4” flange lock
nut.
Tighten 1/4” flange lock nut to secure
the conduit clamp around the wire tube
as shown.
Insert the wire harness through the
plastic tube as shown.
Pull the wire harness through the
plastic tube as shown.
Plug wire harness in.
Place a conduit clamp around the platic
tube.
Secure to the inside of the rear cross-
member using a 1/4” X 3/4” hex bolt and
1/4” flange lock nut.
AMERICAN STANDARDS fOR WIRING:
yELLOW - LEfT
GREEN - RIGHT
BROWN - RuNNING
WHITE - GROuNDING