ShoreLand'r MC2000 - Manual (Page 6)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
M406105
Page 6 REV A 9/07/04
Detail A
Tailgate Bumpers
Locate a 3/8” x 2” carriage bolt. Insert it into one of the rubber
bumpers as shown in Detail A on page 6. Next place on a flat
washer, lock washer and hex nut. Thread nut on only enough
to start on the threads so it donʼt come off when handling.
Position the assembly as shown in Detail A. Align the square
portion of the carriage bolt head with the slot in the tailgate.
Insert the carriage head bolt into the round portion of the key
hole slot, then slide the square of the bolt head into the long
portion of the key hole slot. Raise the assembly matching the
square of the bolt with the slot while you tighten the hex nut
on the bolt to secure in this position.
Repeat this process on the other bumper assembly.
Detail B
Ramp Latch
Handle Assembly