beautypg.com

ShoreLand'r MC2000 User Manual

Page 3

background image

Midwest Industries, Inc.

Ida Grove, IA 51445

800.859.3028

www.shorelandr.com

M406105

Page 3

REV A 9/07/04

Locate the torsion axle assembly.

Position it under the frame so that the

axle end units that have the spindles

welded to them is pointing towards the

rear of the trailer as shown in Diagram

A. Place a 5/8” flat washer on each of

the four 5/8” x 5-1/2” hex bolts and drop

them in the holes in the side frames as

shown in Detail E on page 4. (See Item #

9). With a jack, hoist, or two people, raise

the axle assembly up under the bottom

side of the trailer frame. Align the holes

in the axle mounting brackets with the

5/8” x 5-1/2” bolt just installed. Place on

another 5/8” flat washer and secure with

5/8” hex flange lock nuts. Tighten.

Brakes

Your trailer does not come standard

with brakes. Check your state towing

laws regarding the brake requirements.

In the event that brakes are required or

you would like to install brakes on your

trailer for added safety, there is an op-

MC2000-03 MOTOR CYCLE

TRAILER, V-TWIN

Two people are required to

properly assemble this trailer.

CARE MUST BE TAKEN NOT TO

SCRATCH OR DAMAGE THE SIDE

SHIELD PANELS WHEN REMOVING

THEM FROM THEIR SHIP POSITION

AND INSTALLING THEM ON THE

TRAILER.

Carefully remove the banded parts and

hardware bag from the frame bundle.

Sort all the items in the hardware bag

by size.

ASSEMBLY INSTRUCTIONS

Axle Assembly

Place the frame on four sawhorses or

something comparable in height and

strength for the assembly process.

tional brake kit available. The Optional

Brake kit No. is TA0012-13. It includes

all the brake components, brake hoses,

line fittings and brake line tubing cut

to length. See your local dealer or call

Midwest Industries, Inc.

for further

details. Phone 1-800-859-3028.

Tire and Wheel Assembly

Mount the tire and wheel assemblies

using the 1/2” fine threaded tapered

lug nuts provided. Tighten to 80-90

ft/lb. of torque using the rotation pattern

as shown in the ShoreLandr’s Own-

ers Manual

. Re-torque the lug nuts

after 50 miles of driving and then

periodically thereafter.