ShoreLand'r TA0015 V.2 User Manual
Titan brakerite electric over hydraulic brake kits

Midwest Industries, Inc.
Ida Grove, IA 51445
800.859.3028
www.shorelandr.com
0003263
REV D 04/29/2008
Page 1
®
Titan BrakeRite
Electric Over Hydraulic Brake Kits
The electric over hydraulic brake system is designed to replace the hydraulic surge brake actuator that was shipped on your trailer as
standard equipment. The electric over hydraulic system is activated electrically when you apply the brakes on the tow vehicle. It can also
be operated by a manual cab control inside the tow vehicle that allows the operator to apply the brakes on the trailer without applying the
brakes on the tow vehicle.
The kit is designed to adapt to different size trailer frames in both steel and aluminum trailer construction. You will have extra
parts and fasteners above what is required for your particular application.
BRAKE KIT
TRAILER SIZE
TRAILER MODELS
TA0015
Over 6,000 lbs. GVWR
6,000, 7,000 & 8,300 lb. Aluminum
5,500 & 5,800 lb. 2X5 Steel Frames
6,800 & 8,000 lb. 3X5 Steel Frames
The following instructions are written to address the different installations and will refer to
the various diagrams for clarity. Note that the view shown may not necessarily be an exact
view of your trailer but the instructions will direct you how to change your existing trailer
brake system to the electric over hydraulic system.
Diagram A
Aluminum I-Beam Frame
Diagram B
6800 & 8000 lb. Steel Frame