ShoreLand'r SLRB55TCBBS - Manual (Page 12)

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0004293
Page 12 of 14 11/04/2010
RB SERIES
The RB-series rear bunk assembly is installed by placing the bunk
assembly mounting channel over the rear cross member and securing in
place with a 1/2” x 4-1/4” hex bolt and lock nut. (See Diagram A). Place the
assembly on the equiload bunk arm and secure by placing a 3/8” x 1” hex
bolt through the bracket on the bunk and the ear on the end of the equiload
arm. Secure in place using a 3/8” lock nut. Repeat on the other end of the
arm. Tighten only enough to hold in position until the boat is placed on the
trailer. Repeat on the other RB-bunk assembly.