ShoreLand'r SLB82TAL - Manual (Page 11)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0004016
Page 11 Rev A 11/18/2008
Front Bunk or Roller Arm:
Mount the bunk bracket weldment or roller arm tube into the pivot
base weldment using a 1/2” X 4-1/2” stainless steel hex head bolt
and secure with a 1/2” stainless steel hex lock nut with nylon insert.
Mount the bunk assembly onto the bunk bracket weldment using
two (2) 1/2” X 1-1/2” stainless steel hex bolts and secure with two
(2) 1/2” stainless steel hex lock nuts with nylon insert. Repeat this
procedure on the opposite side of the trailer.
Rear Bunk or Roller Arm:
Mount the bunk bracket weldment or roller arm tube into the pivot
base weldment using a 1/2” X 4-1/2” stainless steel hex head bolt
and secure with a 1/2” stainless steel hex lock nut with nylon insert.
Mount the bunk assembly onto the bunk bracket weldment using
two (2) 1/2” X 1-1/2” stainless steel hex bolts and secure with a two
(2) 1/2” stainless steel hex lock nuts with nylon inserts. Repeat this
procedure on the opposite side of the trailer.