ShoreLand'r SL80TAL - Manual (Page 5)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com M311055
REV B 5/05/04 Page 5
Winch Post Assembly
Mount the winch post assembly to the tongue at
a location that best fits your watercraft. Secure
the winch post base weldment (Ref#2) to the
tongue using two (2) 1/2” X 3-9/16” X 5” square
u-bolts (Ref#11) and four (4) 1/2” stainless steel
hex lock nuts with nylon inserts. Mount the winch
post angle tube weldment (Ref#3) on the tongue
tube at a height that would best fit your watercraft
using a 1/2” X 3-9/16” X 5” square u-bolt over
the flange as shown in the drawing. Place the
legs of the U-bolt into the clamp (Ref#21) and
secure with two (2) 1/2” stainless steel hex lock
nuts with nylon inserts.
Winch Post: