ShoreLand'r SL70TAL V.1 - Manual (Page 12)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003355
REV C 2/14/06 Page 12
Front Bunk Assembly
Mount the front bunk support weldments to the pivot weldments by placing them in the channel of the pivot weldments and attaching
with 1/2” x 4 -1/2” stainless steel hex bolts and 1/2” stainless steel lock nuts. See Detail M. Place the bunk assembly over the front bunk
support weldment. See Detail G on Page 2. Align the holes of the bunk brackets with the holes in the support weldment and secure using
1/2” x 1-1/2” stainless steel hex bolts and 1/2” stainless steel lock nuts. Tighten but do not over tighten because the bunks must rotate to
conform to the boat bottom.
Detail M