ShoreLand'r SL70TAL V.1 - Manual (Page 11)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003355
REV C 2/14/06
Page 11
Rear Bunk Assembly
Mount the rear bunk support weldments to the pivot
weldments by placing them in the channel of the
pivot weldments and attaching with 1/2” x 4-1/2”
stainless steel hex bolts and 1/2” stainless steel
lock nuts. See Detail G on page 2. Place the bunk
assembly over the rear bunk support weldment,
align the holes of the bunk brackets with the holes
in the support weldment and secure using 1/2” x
1 1/2” stainless steel hex bolts and 1/2” stainless
steel lock nuts. Tighten but do not over tighten
because the bunks must rotate to conform to the
boat bottom.
Detail L