ShoreLand'r Fishing - Manual (Page 24)

Winch:
Mount the winch stand to the tongue in a desired location
that best fits your boat. Secure with three (3) 3/8” X 4” hex
bolts and 3/8” flange lock nuts.
Mount the bow stop bracket to the winch stand using two (2)
3/8” X 1” carriage bolts and two (2) 3/8” flange lock nuts.
Place the 3” bow roller inside the small winch bracket. Insert
the bow roller pin through the small winch bracket and the 3”
bow roller. Secure this assembly using two (2) 1/2” push
nuts.
Mount the winch assembly on top of the small winch bracket.
Secure the winch assembly using two (2) 3/8” X 1” hex bolts
and 3/8” flange lock nuts. NOTE: Use a 3/8” flat washer on
the bolt head used in the slotted hole on the winch.
Mount the winch handle on the winch using the hardware
provided with the winch.