HEIDENHAIN IK 5294 Installation - Manual (Page 16)

16
IK 5000 QUADRA-CHEK
Installation Instructions
Operating Instructions available at www.heidenhain.de
2. Model information
This guide covers multiple products. Whenever possible the product name shown on
the cover page is used. When a feature pertains to a specific product variant the specific
product name or the product name and the ID are shown.
This guide covers specifications, mounting and installation for the following models:
Connector IK 529x IK 529x IK 539x IK 539x IK 549x IK 549x IK 549x IK 559x
Axes XYZ A • • • • • • • •
Axes Q H Optional Optional Optional Optional - Optional Optional Optional
Optical edge
detector P, R - - • - • - - -
Light control K - - - Optional - Optional Optional •
Zoom control N - - - Optional - Optional Optional Optional
Touch probe M - • - • - - • TP200
CNC XYZ B - - - - • • • •
CNC Q J - - - - - Optional Optional Optional
ID 678414-xx 678415-xx 678416-xx 678417-xx,
678418-xx
678419-xx 678420-xx 678421-xx 678422-xx
Index - - - - - - - -
Notice
Verify that these Installation Instructions are valid by matching the Index on
the label L with the Index listed at www.heidenhain.de. If these instructions
are not valid, download the applicable Installation Instructions from
www.heidenhain.de.
An index may not be present on all products.
Safety
The following messages provide safety information for preventing personal injury and
product damage:
Read and understand these instructions before use to avoid the possibility of
personal injury or death.
The protection provided by the equipment may be impaired if used in a manner
not specified. Do not use this product in any way other than its intended use.
Notice
For safety, operation and handling of the product, keep this document for
future reference. This document must be kept within reaching distance of the
product.
L

IK xxxx QUADRA-CHEK
ID 123456-xx xx
SN 12 345 678 x
Product name
ID
Index
ID label , Located on back of card