HEIDENHAIN IK 5294 Installation - Manual (Page 15)

15
IK 5000 QUADRA-CHEK
Installation Instructions
Operating Instructions available at www.heidenhain.de
1. How to use these instructions
The installation instructions contained in this document provide the information
necessary to install this product. Operating information can be found in the following
IK 5000 QUADRA-CHEK documents:
• Video Edge Detection Systems Operating Instructions (ID 735358)
• Optical Edge Detection and Crosshair Systems Operating Instructions (ID 735359)
• Multisensor Systems Operating Instructions (ID 735364)
• Manual 3D Systems Operating Instructions (ID 735365)
• Operating Instructions Addendum (ID 809541-23)
These documents can be downloaded from www.heidenhain.de.
The documents listed below are available to Original Equipment Manufacturer’s (OEM’s)
and can be provided on request.
• OEM System Setup Guide (ID 735363) (for OEM only)
• CNC Setup and PID Loop Tuning (ID 753357) (for OEM only)
• OEM Addendum (ID 1041353-20) (for OEM only)
Contact [email protected] to request an OEM document.
These instructions are intended for use by personnel qualified to install and maintain the
HEIDENHAIN, IK 5000 QUADRA-CHEK .
A qualified person is someone whose technical education, knowledge and experience,
as well as knowledge of the relevant system of rules qualifies the person to evaluate the
delegated task and recognize possible hazards.
Messages shown in these instructions
The following examples show how safety, property damage and general advice messages
are shown in these instructions. Read and understand these types of messages before
proceeding to prevent personal injury or property damage.
Messages about other safety messages. These supplemental directives do
not address specific hazards, but instead provide information that promotes
awareness and use of specific safety messages.
Warning!
Messages that provide information about the nature of a hazardous situation,
the consequences of not avoiding a hazardous situation, and methods for
avoiding a hazardous situation.
Notice
Messages that provide information primarily about situations that can lead to
property damage, the potential consequences of not avoiding the situations, or
methods for avoiding the situations and general advice messages.
Fonts used in these instructions
Items of special interest or concepts that are emphasized to the user are shown in bold
type.
English
Contents
How to use these instructions .................15
Model information ....................................16
Specifications ............................................17
Installation .................................................18
Initial power-up ..........................................20