HEIDENHAIN TNC 620 (81760x-01) ISO programming - Manual (Page 10)

Fundamentals
TNC model, software and features
10
TNC 620 | User's Manual for DIN/ISO Programming | 3/2014
DXF Converter software option (option number 42)
■ Supported DXF format: AC1009 (AutoCAD R12)
■ For contours and point patterns
■ Simple and convenient specification of reference points
Extracting contour
programs and machining
positions from DXF data.
Extracting contour sections
from plain-language
programs.
■ Select graphical features of contour sections from conversational
programs
KinematicsOpt software option (option number 48)
■ Backup/restore active kinematics
■ Test active kinematics
Touch-probe cycles for
automatic testing and
optimization of the machine
kinematics
■ Optimize active kinematics
Cross Talk Compensation (CTC) software option (option number 141)
■ Determination of dynamically caused position deviation through axis
acceleration
Compensation of axis
couplings
■ Compensation of the TCP
Position Adaptive Control (PAC) software option (option number 142)
■ Changing of the control parameters depending on the position of the
axes in the working space
Changing control
parameters
■ Changing of the control parameters depending on the speed or
acceleration of an axis
Load Adaptive Control (LAC) software option (option number 143)
■ Automatic determination of workpiece weight and frictional forces Dynamic changing of control
parameters
■ Continuous adaptation of the parameters of the adaptive precontrolling
to the actual weight of the workpiece during machining
Active Chatter Control (ACC) software option (option number 145)
Fully automatic function for chatter control during machining