Epson ELP-600 - Manual (Page 93)

91
Maintenance
This section describes maintenance tasks such as cleaning the projector and
replacing consumable parts.
Cleaning
You should clean the projector if it becomes dirty or if the quality of projected
images starts to deteriorate.
Be sure to read the separate Safety Instructions/World-Wide Warranty
Terms for details on safe handling of the projector during cleaning.
Clean the projector case by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth with water containing a
small amount of neutral detergent, and then firmly wring the cloth dry before
using it to wipe the projector case. Then wipe the case again with a soft, dry
cloth.
Caution :
Do not use volatile substances such as wax, alcohol or thinner to clean the projector
case. These can cause the case to warp and make the coating finish peel off.
Use a commercially-available air blower, or use a lens cleaning paper to gently
wipe the lens.
Caution :
Do not rub the lens with harsh materials or subject the lens to shocks, as it can easily
become damaged.
Cleaning the Projector Case
Cleaning the Lens