Epson ELP-600 - Manual (Page 25)

23
Some workstation-type computers have a 13w3 monitor port.
Use a commercially-available 13w3
⇔
D-Sub 15-pin adapter cable to connect
the Computer 2/Component Video port at the rear of the projector to the
monitor port of the computer.
Tip :
• After making the connections, change the Comp2/YCbCr Input setting in the Setting
menu to Analog-RGB. (P.69)
• Do not bind the power cord and the computer cable together, otherwise image
interference or errors in operation may result.
• Some workstations may require a special cable. Consult the workstation manufacturer
for further details.
If the monitor port is a 13w3 port
13w3 cable (commercially-available)
To Computer 2/
Component Video port
To monitor port