Polaris 2015 GEM eM1400 LSV - Manual (Page 31)

29
FEATURES AND CONTROLS
Brake Pedal
Push the brake pedal toward the floor to slow or stop the vehicle. Apply the brakes before
turning the key on.
Accelerator Pedal
The accelerator pedal will function
only when the key is ON and the
direction selector switch is set to
either forward or reverse. To begin
moving or to increase vehicle speed,
gradually press the accelerator pedal
toward the floor. Holding the
accelerator pedal down continuously
will accelerate the vehicle to the
maximum speed.
To slow the vehicle, release the
accelerator pedal. Electric motor
braking provides braking when the
pedal is released. For additional speed
control or to stop the vehicle, apply
the service brakes.
Seat Removal
Pull upward on the rear of the seat to disengage the latches. Slide the seat rearward and lift it
away from the seat base.
To reinstall the seat, align the front seat tabs with the slots on the front of the seat base. Slide
the seat fully forward, then push down firmly along the rear edge of the seat to secure the
latches.
Trailer Hitch Bracket
This vehicle is equipped with a receiver hitch bracket for a trailer hitch. Trailer towing
equipment is not supplied with this vehicle.
To avoid injury and property damage, always heed the warnings and towing capacities
outlined on pages 39-40.
Accelerator
Pedal
Brake
Pedal