Features and controls, Main power connector – Polaris 2015 GEM eM1400 LSV User Manual
Page 30
28
FEATURES AND CONTROLS
Main Power Connector
NOTICE: Damage to electrical connections
and components will occur if they
are unplugged before the main
power connector is disconnected.
Always disconnect the main power
connector before servicing or
unplugging any electrical
components.
When disconnected, the main power
connector disconnects the battery pack
from all electrical components, with the
exception of the contactor. After servicing
the vehicle, the main power connector
should be the last connection to be made.
The main power connector is located
under the seat on the passenger side of the
vehicle, adjacent to the main line
contactor. To disconnect, unplug the
connector.
WARNING! Insulate any tools used within the
battery area to prevent sparks or battery
explosion caused by shorting the battery
terminals or wiring. Remove the batteries, or
cover the exposed terminals with an insulating
material.
Front of vehicle
Main Power
Connector
Battery Installation
and Wire Lead
Connection
48 Volt System
to contactor +
Front of vehicle
to controller -