Polaris 2015 GEM eM1400 LSV - Manual (Page 22)

20
FEATURES AND CONTROLS
Console
Battery Discharge Indicator
The battery discharge indicator displays the amount of
charge removed (used) from fully charged batteries.
When the batteries are fully charged, the gauge will
display 100%. The charge status indicator will be
solid green (see page 21).
Avoid discharging the batteries more than 80%.
Hour Meter
The hour meter records and displays the hours of actual “key on” time since manufacture.
Auxiliary 12-Volt Terminal Board
The 12-volt terminal board is located under the hood. It contains constant 12-volt, switched
12-volt and ground terminals that can be used to power auxiliary lights and accessories. The
terminals are limited to 10 amps.
Auxiliary Outlets
The 12-volt receptacle can be used to power accessories, but is limited to 10 amps (the
terminal board and 12-volt outlet are fused together at 10 amps.
Direction Selector Switch
When the direction selector is in the center position, the
vehicle is in neutral. The vehicle will not move if the
accelerator is depressed.
Push the top of the switch to choose forward operation. Push
the bottom of the switch to choose reverse operation.
Always come to a complete stop before reversing direction.
Tip: The malfunction light will illuminate after reversing direction if
you press the accelerator pedal before coming to a complete
stop.
Headlight Switch
The ignition switch key must be in the ON/RUN position to operate
the headlights. Press the top of the rocker switch toward the dash to
place the headlights on high beam. Move the rocker switch to the
center position to place the headlights on low beam. Press the bottom
of the rocker switch to turn off the headlights.
Forward
Neutral
Reverse
High
Off
Low