Operation, Driving safely – Polaris 2008 Ranger Crew User Manual

Page 47

OPERATION

Driving Safely

Driving Procedure

1. Sit in the driver's seat and fasten the seat belt.
2. After starting the engine and allowing it to warm up, apply the ser-

vice brakes, and shift the transmission into gear.

3. Check your surroundings and determine your path of travel.
4. Release the park brake.
5. Keeping both hands on the steering wheel, slowly release the brakes

and depress the throttle with your right foot to begin driving.

6. Drive slowly. Practice maneuvering and using the throttle and

brakes on level surfaces.

NOTE:

Low gear is the primary range for operating the RANGER. High gear is

intended for use on hard-packed surfaces with light loads.

This manual is related to the following products:

2009 Ranger CREW 2009 Ranger 4x4 700 EFI 2007 Ranger 500 2x4 2007 Ranger 500 4x4 2008 Ranger 2x4 2010 Ranger 2x4 500 2008 Ranger 4x4 500 EFI 4X4 500 EFI 2008 Ranger 4x4 700 EFI 2008 Ranger 6x6 700 EFI 2009 Ranger 4x4 500 EFI 2009 Ranger 6x6 700 EFI 4X4 700 EFI 6X6 700 EFI