Features and controls, Instrument cluster – Polaris 2008 Ranger Crew User Manual

Page 34

FEATURES AND CONTROLS

Instrument Cluster

Rider Information Center

Downloading Codes
The EFI diagnostic mode is for informational purposes only. Please see

your Polaris dealer for all major repairs.
See page 32 for Blink Codes and Failure Descriptions. Use the follow-

ing procedure to download blink codes (failure codes) from the EFI

module.
1. Apply the brakes. Engage the parking brake.
2. Stop the engine.
3. Turn the key switch to the ON position.
4. Turn the key switch off and on three times in less than five seconds,

then leave the switch on. Any blink code numbers stored in the EFI

module will display, one at a time, on the screen. The number “61”

and the word “END” displays after all codes have been transmitted.

This manual is related to the following products:

2009 Ranger CREW 2009 Ranger 4x4 700 EFI 2007 Ranger 500 2x4 2007 Ranger 500 4x4 2008 Ranger 2x4 2010 Ranger 2x4 500 2008 Ranger 4x4 500 EFI 4X4 500 EFI 2008 Ranger 4x4 700 EFI 2008 Ranger 6x6 700 EFI 2009 Ranger 4x4 500 EFI 2009 Ranger 6x6 700 EFI 4X4 700 EFI 6X6 700 EFI