Polaris 2007 Victory Hammer - Manual (Page 110)

105
MAINTENANCE
Clutch
Adjust Clutch Cable Freeplay
1. Remove the right side cover.
2. Hold cable (1) and loosen the adjuster lock nut (2).
3. Turn cable adjuster (3) while holding cable.
4. Turn the cable adjuster in or out until the clutch lever freeplay
(A) is .020-.060 inch (.5-1.5 mm).
5. Tighten the adjuster lock nut securely while holding cable.
6. Reinstall right side cover.
7. Verify that the safety switch activates so the motorcycle cannot
be started in gear with clutch lever released.
NOTE: The starter interlock switch is dependent on the clutch lever
freeplay being set correctly to ensure activation of the clutch safety
switch.
3
1
2
A