Polaris 2007 Victory Hammer - Manual (Page 106)

A
Fast Idle
Position
Fast Idle
Lever
Rest
Position
B
101
MAINTENANCE
Fast Idle Lever and Cable
1. Movefast idle lever. It should move smoothly from rest
position to fast idle position and back again. Measure
free-play (A), which is the amount of lever movement
from the rest position to the point of cable resistance.
Specification: Between 3-6mm (1/8-1/4 in.) free-
play and 1500--3000 RPM @ Fast Idle Speed
Fast Idle Lever Freeplay Adjustment
1. If adjustment is necessary, remove seat (page 121) and
fuel tank (page 99).
2. Loosen fast idle cable adjuster lock nut (B).
3. Turn cable adjuster in or out until freeplay at lever is
1/8-1/4 inch (3-6 mm).
4. Tighten adjuster lock nut securely.
5. Reinstall fuel tank and seat.
6. Start engine and let it idle with transmission in
NEUTRAL and fast idle lever in the rest (normal run)
position.
7. Turn handlebars from full right to full left. If engine
RPM increases when bars are turned, re-check throttle
cable and fast idle cable adjustments, cable condition,
and routing. If problem persists contact your VICTORY
dealer.