Polaris 2002 ATV Sportsman 6X6 - Manual (Page 94)

91
MAINTENANCE AND LUBRICATION
Adjustments
Steering Inspection
The steering assembly of the machine should be checked periodically
for loose nuts and bolts. If loose nuts and bolts are found, have your
dealer tighten them before riding your vehicle.
Camber and Caster
The camber and caster are non-adjustable.
Handlebar Adjustment
Your 6x6 has handlebars
which can be adjusted for your
personal fit.
1. Remove handlebar cover
and loosen the four bolts.
2. Adjust handlebar to desired
height. Be sure handlebars
do not hit gas tank or any
other part of machine when
turned fully to left or right.
3. Torque handlebar adjuster block bolts to 10 to 12 ft. lbs.
Optional Suspension Springs
Although your Polaris 6x6 suspension has the capability of providing
you with the best ride possible, the following accessory springs are
available to better suit your individual riding preference. NOTE:
Optional springs may be a different color than standard springs.
Owner may paint springs to desired color using Polaris touch up paint,
available through your dealer.
Sportsman 6x6 -
Front Strut Spring
7041375-067
OPTION
64/113 lb/in
7041450-195
STANDARD
101 lb/in
N/A
1
2
3
4
WARNING
Improper adjustment of the handlebars or incorrect torquing of the
adjuster block tightening bolts can cause limited steering or
loosening of the handlebars, resulting in loss of control and
possible serious personal injury or death.
SOFT FIRM